Warthog Systems File Formats


The format for standard Warthog text files is shown in the following example.  This is the simplest format that contains most the information that can be used by LabAnalyst. It can be assembled in most database or spreadsheet programs, or with a word processor.  Note: the comments indicated by two asterisks (**) are NOT part of a real file.

Actual data
 
Comments on data format
306,4,3
"07-05-1992","15:09:34"
"female Belding 003, 354.3 g, VO2 stable"
0,1,1,1,0,"% Oxygen                      "
1,3,1,0,2,"Degrees C                     "
0,1,1,5,0,"S.C.C.M.  in heliox           "
3090,354.3,760,0,1550
3
30,49
96,50
157,51
1.953636E-02,-14.64144,3103.476
2.3473535E-02,-14.68532,3124.896
2.702881E-02,-14.87214,3119.073

......  etc.
 
** # samples, interval in seconds, # channels
** date & time the file was started, IN QUOTES
** comments; up to 252 characters, IN QUOTES
** gain, etc.  for each channel.  The exact values
   are not important, but there must be 5 values
   followed by a 30 character label IN QUOTES.
** flow (ml/min), mass, BP, Temp., effective volume
** number of markers (0 if none)
** for each marker, sample number and ASCII value
  

** sample 1, channels 1, 2, and 3
** sample 2, channels 1, 2, and 3
** sample 3, channels 1, 2, and 3

 (the rest of the data follows here...)

The format for WartHog BINARY files is roughly similar, but they start with a text code value (the first value in the file).  All other numeric data are encoded in 4-byte FutureBasic binary format.  Current versions use a floating-point (FP) format with a text code of "-999" (not the same as the 4-byte IEEE binary floating point frequently used by DOS/Windows software). 

Each text string is NOT in quotes, but it is preceded by a FP real value equal to the number of characters in the string.  Commas (and other delimiters) are not used.   The sample data are stored channel-by-channel, not case-by-case.  Due to this complexity, for most files, use of Warthog text format is considerably simpler. 

On a Mac running OS 9 or other 'classic' operating systems, this icon appears for 'chart' format files:

 

This icon is used to indicate files saved from LabAnalyst (they have identical formats to binary files saved from , but the different icon helps let you know if you've worked on a file previously.

 

 

Sable Systems SSCF  This format is used by DATACAN software on Wintel computers.  Because data must undergo translation between IEEE and Warthog formats, disk access to SSCF files isn't as fast as for Warthog binary files.  Note that the icon shown here will only appear if you save a file in SSCF on a Macintosh running OS X. 

If you save an SSCF file on a Mac running OS 9 or other 'classic' operating systems, a smaller 'sable' icon will appear:

These sable-image icons will will not appear on a Wintel machine, or if an SSCF file was created with DATACAN on a Wintel machine and then copied to a Macintosh (a generic 'text' icon is used instead).

Text format (ASCII)  The format for ASCII output is a simple spreadsheet with commas or tabs as column delimiters, with each row terminated with a carriage return. The first line can contain column labels.

Please note that maximum-sized files -- even in the compact binary formats -- are large.  They require about 500 Kb of disk space per channel for a 128K sample file (so a 16-channel maximum-sized file fills roughly 8 mb!).

back to the LabHelper UI2 Topics page

LabAnalyst X page

Mark Chappell's page